Options

A variety of adequate optional equipment tops off the ALMATEC pump program. It allows a precise set-up to your specific application.


Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available. The E-SERIES pumps can be equipped with screwed-on or flanged pulsations dampers, while the CHEMICOR and BIOCOR pump series with an inline pulsation damper.

Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR


Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.

Pump series: E-SERIES, CHEMICOR, BIOCOR


Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be installed in the pump's center housing (available as pneumatic version also).

Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR


Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of all liquids and in case of a diaphragm rupture it outputs a corresponding signal to a controller that triggers an alarm or disconnects the pump via a connected solenoid valve.

Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR


Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10. For the pumps of the AH-Series the flange connection to DIN or ANSI / PN 16 is standard.

Pump series: E-SERIES, AH


Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this greatly reduces environmental pollution. For the pumps of the metal series CHEMICOR another constructive solution is available. Ball lifters - which are turnable by hand - are fitted to the four ball valves. By turning the handles the ball valves are lifted out of their seats.

Pump series:: E-SERIES, CHEMICOR


Transport Carts
Many industrial applications need not only stationary air-operated diaphragm pumps but also mobile pumping units (e.g. for use as an emergency pump, as short-dated replacement for a pump to be repaired or for decanting between two containers). For these purposes a transport cart is available.

E-SERIES with Pulsation Damper		Draining System E-SERIES		Flange Connection E-SERIES